البحث العلمي
الأوراق العلمية التي تم نشرها في المجلات العلمية والمؤتمرات العالمية بواسطة منسوبي كلية الهندسة التطبيقية بالمزاحمية خلال الثلاث سنوات السابقة |
|||||
|
ISI JOURNALS |
||||
No. |
Article Reference -Names, Title, Journal Name etc |
||||
1 |
H.F. Alharbi, M. Luqman, K.A. Khalil, Y.A. Elnakady, O.H. Abd-Elkader, A.M. Rady, N.H. Alharthi, M.R. Karim, Fabrication of core-shell structured nanofibers of poly (lactic acid) and poly (vinyl alcohol) by coaxial electrospinning for tissue engineering, European Polymer Journal 98 (2018) 483-491. |
||||
2 |
H.F. Alharbi, M. Luqman, E. El-Danaf, N.H. Alharthi, Experimental and Numerical Study of Texture Evolution and Anisotropic Plastic Deformation of Pure Magnesium under Various Strain Paths, Advances in Materials Science and Engineering 2018 (2018) 12. |
||||
3 |
Hamad F. Alharbi, H. Fouad, Khalil Abdelrazek Khalil, Nabeel H. Alharthi, Viscoelastic behavior of core-shell structured nanofibers of PLA and PVA produced by coaxial electrospinning, Polymer Testing, Accepted. |
||||
4 |
N.H. Alharthi, S. Bingol, A.T. Abbas, A.E. Ragab, M.F. Aly, H.F. Alharbi, Prediction of Cutting Conditions in Turning AZ61 and Parameters Optimization Using Regression Analysis and Artificial Neural Network, Advances in Materials Science and Engineering 2018 (2018) 10. |
||||
5 |
Mahir Es-Saheb, Sohail M. A. Khan, “Specific crack enthalpy as material characterization parameter”; Materials Testing, Issue 4, 2018 |
||||
6 |
Marouani H., Hassine T., ‘A stress distribution modelization of a neat fit pin-loaded hub’, World Journal of Engineering, Accepted proof, 2018. |
||||
7 |
Li, K; Huang, YS; Liu, JJ; Sarfraz, M; Agboola, PO; Shakir, I; Xu, YX (2018). A three-dimensional graphene framework-enabled high-performance stretchable asymmetric supercapacitor. JOURNAL OF MATERIALS CHEMISTRY A Volume: 6 Issue: 4 Pages: 1802-1808 DOI: 10.1039/c7ta09041b |
||||
8 |
N.H. Alharthi, S. Bingol, A.T. Abbas, A.E. Ragab, E.A. El-Danaf, H.F. Alharbi, Optimizing Cutting Conditions and Prediction of Surface Roughness in Face Milling of AZ61 Using Regression Analysis and Artificial Neural Network, Advances in Materials Science and Engineering 2017 (2017) 8. |
||||
9 |
Mahir Es-Saheb, Sohail M. A. Khan, M. E. Ali Mohsin, “Fatigue and Fracture Behaviour of AA 7075-T6 Plates Repaired at Different Crack Lengths”; Chemical Engineering Transactions CEt; Vol. 56, 2017. |
||||
10 |
Sohail M. A. Khan, Mahir Es-Saheb, M. E. Ali Mohsin, “Fatigue Life of Cracked Aerospace Grade Aluminium Repaired with Bonded Composite Patch: Experimental Study”; Chemical Engineering Transactions CEt; Vol. 56, 2017. |
||||
11 |
K. Hergli, H. Marouani ,M. Zidi , Yasser Fouad, Mohamed Elshazly Identification of Preisach hysteresis model parameters using genetic algorithms Journal of King Saud University – Science Available online 2 December 2017 |
||||
12 |
Hergli K., Marouani H., Zidi M., Numerical determination of Jiles-Atherton hysteresis parameters: Magnetic behavior under mechanical deformation, Physica B: Condensed Matter, In press, Available online, 2017. |
||||
13 |
Kerme, E. D., Chafidz, A., Agboola, O. P., Orfi, J., Fakeeha, A. H., & Al-Fatesh, A. S. (2017). Energetic and exergetic analysis of solar-powered lithium bromide-water absorption cooling system. Journal of Cleaner Production, 151, 60-73. doi:10.1016/j.jclepro.2017.03.060 |
||||
14 |
Agboola O. Phillips (2017). An investigation of desalination research in Saudi Universities. DESALINATION AND WATER TREATMENT Volume: 65 Pages: 79-88 DOI: 10.5004/dwt.2017.20301 |
||||
15 |
N. Sulaiman, J. Mohamad-Saleh, and A. Ghani Abro, “Robust Variant of Artificial Bee Colony (JA-ABC4b)," International Journal of Bio-Inspired Computation (IJBIC), Volume 10 (2), 2017. |
||||
16 |
M. I. Al-Rayif, H. Seleem, A. Ragheb, and S. Alshebeili (2017). Experimental Demonstration for PAPR Reduction in OFDM System Using Partial-OSLM Technique. Journal of Circuits, Systems and Computers, https://doi.org/10.1142/S0218126618501062 |
||||
17 |
Usman M, Al-Rayif MI (2017). Threshold detection for visible light communication using parametric distribution fitting. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields. https://doi.org/10.1002/jnm.2305 |
||||
18 |
Abdelouahab Bentrcia; Hussein Seleem ; Habib Fathallah, “Multiplicative PIC Detection for OCDMA Systems with Non-Negativity Constraints”, accepted in IET communications. DOI: 10.1049/iet-com.2017.0624. |
||||
19 |
Abdelouahab Bentrcia, “A Domain Decomposition Approach for Preconditioning in Massive MIMO Systems”, Arabian Journal for Science and Engineering, (2017). https://doi.org/10.1007/s13369-017-2988-y. |
||||
20 |
Abdelouahab Bentrcia, “Domain Decomposition Based PIC Detectors for Massive MIMO”, Wireless Personal Communications, September 2017, Volume 96, Issue 2, pp 2141–2160. |
||||
21 |
Amr Ragheb, Habib Fathallah, Abdelouahab Bentrcia, Mobien Shoaib and Saleh Alshebeili, " Complexity Reduction of Equalization/Pre-Emphasis Using Set Membership Filtering for NG LR-PON," in Photonic Network Communications April 2017, Volume 33, Issue 2, pp 166–178. |
||||
22 |
Agboola O. Phillips and Al-Mutaz Ibrahim S. (2017). Effect of cooling the glass cover of an inclined solar water Distillation system under the climatic condition of Riyadh, Saudi Arabia. DESALINATION AND WATER TREATMENT Volume: 76 Pages: 1-18 DOI: 10.5004/dwt.2017.20634 |
||||
23 |
Ibrahim, K.A., Naz ,M.Y., Sulaiman, Sh.S., Jamil, AG.Y., &Abdel-Salam, N.M. (2017). Effect of Urea and Borate Plasticizers on Rheological Response of Corn Starch. Polymers, 9, 361; doi:10.3390/polym9090361 w |
||||
24 |
Naz, M.Y., Sulaiman ,S.A., Shukrullah, . Ghaffar ,S. A., Ibrahim,K.A., & N.M. AbdEl-Salam, N.M. (2017). Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry. Measurement 106 (2017) 203–210
|
||||
25 |
Yong Liu, Kun Lan, Mahir H. Es-Saheb, Ahmed A. Elzatahry, and Dongyuan Zhao; Template Synthesis of Metal Tungsten Nanowire Bundles with High Field Electron Emission Performance; DOI: 10.1039/c6ra09308f, The Royal Society of Chemistry 2016, RSC Advances; June 2016, 6, 62668 –62674 |
||||
26 |
Mahir Es-Saheb, Shahid M Azhar, Ahmed Elzatahry, Mohammed Sohail Mazheralikhan, “Investigation of Co Additions on the Characteristics and Electrical Erosion Resistance of the Ag-W Metal Composite”, International Journal of Electrochemical Science”, (2016) |
||||
27 |
Imran Shakir, Mansoor Sarfraz, Zahid Ali, Mohamed F.A. Aboud, Philips Olaleye Agboola. (2016). Magnetically separable and recyclable graphene-MgFe2O4 nanocomposites for enhanced photocatalytic applications. Journal of Alloys and Compounds, Vol 660, Pages 450–455. |
||||
28 |
19. Phillips O. Agboola, Saleh Jihad. (2016) Feasibility of Municipal Solid Waste (MSW) as energy sources for Saudi future Reverse Osmosis (RO) desalination plants. Polish Journal of Chemical Technology. Vol 18, 4, 82—89, 10.1515/pjct-2016-0075 |
||||
29 |
Ali H. Alqahtani, Ahmed Iyanda Sulyman, and Abdulhameed Alsanie, “Rateless Space Time Block Code for Mitigating Pilot Contamination Effects in Multicell Massive MIMO System with Lossy Links,” IET Communications Journal, vol.10, no.16, p:2252-2259, Nov 2016. |
||||
30 |
H.F. Alharbi, S.R. Kalidindi, Crystal plasticity finite element simulations using a database of discrete Fourier transforms, International Journal of Plasticity 66 (2015) 71–84. |
||||
31 |
Sohail M. A. Khan, Mahir Es-Saheb, “Fatigue Crack Growth Analysis of Cracked Aluminum Plates Repaired with Bonded Composite Patch”, International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 3, Issue-8, pp5-8, Aug.-2015. |
||||
32 |
Shahid M Azhar and Mahir Es-Saheb, “Homogenous Silver-Tungsten Composite Production for Electrical Contacts”, Research Journal of Applied Sciences, Engineering and Technology 9(8): 549-560, 2015. |
||||
33 |
Al-Hwaiti, M., Ibrahim, K.A. & Harrara, M.(2015). Removal of heavy metals from wastephosphogypsum materials using polyethylene glycol and polyvinyl alcohol polymers . Arabian Journal of Chemistry, (http://creativecommons.org/licenses/by-nc-nd/4.0/). |
||||
34 |
O. Phillips Agboola and F. Egelioglu. (2015) An empirical evaluation of an integrated inclined solar water desalination system with spray jets variation. Desalination and Water Treatment, pp 1-7 DOI: 10.1080/19443994.2013.874113 |
||||
35 |
O. Phillips Agboola, U. Atikol & Hossein Assefi (2015) Feasibility Assessment of Basin Solar Stills International Journal of Green Energy, 12:2, 139-147, DOI: 10.1080/15435075.2014.889006 |
||||
36 |
Phillips O Agboola; Ibrahim I. Al-Mutaz; Egelioglu, Fuat (2015). Thermo-Economic performance of Inclined Solar Water Distillation Systems. THERMAL SCIENCE Vol 19, Suppl 2, S557-S570. DOI:10.2298/TSCI140127056A |
||||
37 |
Shaker S.Hasan, Somer M. Nacy, Eldaw E. Eldukhri, Haider Galil Kamil, Enass H. Flaieh, 2015. Position Control of Linkage Underactuated Robotic Hand. IISTE Control Theory and Informatics, Vol.5, No.3, 1-8, ISSN 2224-5774 (Paper), ISSN 2225-0492 (Online), www.iiste.org |
||||
38 |
Hafsi, S., Laabidi, K., Farkh, R. (2015) A new tuning method for stabilization time delay systems using PIλDμ Controllers.
|
||||
|
NON-ISI JOURNALS |
||||
No. |
Article Reference -Names, Title, Journal Name etc |
||||
39 |
Mohammad Dweirj, Feras Fraige, Hani Alnawafleh, Awaad Titi, 2016, Geotechnical Characterization of Jordanian Limestone, Geomaterials, Vol.7 No.1. |
||||
40 |
Hani M. Alnawafleh, Feras Y. Fraige, Khalid E. Tarawneh, Ibrahim A. Sarairah, Laila A. Al-Khatib, 2016, Fractional Yield, Extract Composition and Variability from Jordanian Oil Shales, Journal of Analytical Sciences, Methods and Instrumentation Vol.6 No.3. |
||||
41 |
Sulaiman N., Mohamad-Saleh J., Abro A.G., “Optimization Of Economic Environmental Dispatch (Eed) Using Recent Modified Abc Variants”, ARPN Journal of Engineering and Applied Sciences, VOL. 11, NO. 18, SEPTEMBER 2016 |
||||
42 |
Hani Muhaisen Alnawafleh, Feras Younis Fraige, Laila Abdullah Al-khatib, Mohammad Khaleel Dweirj, 2015, Jordanian Oil Shales: Variability, Processing Technologies, and Utilization Options. Journal of Energy and Natural Resources. Vol. 4, No. 4, 2015, pp. 52-55. doi: 10.11648/j.jenr.20150404.11 |
||||
43 |
Alnawafleh, H.M.; Fraige, F.Y., 2015, Shale oil solvent extraction of central Jordan El-Lajjun Oil Shale, Journal of Analytical Sciences, Methods and Instrumentation, 5, 35 – 43. |
||||
44 |
Alnawafleh, H.M.; Fraige, F.Y., 2015, Analysis of selected Shale oil samples from El-Lajjun, central Jordan, Geomaterials, 5, 77 – 84. |
||||
45 |
N. K. Hassan, Yasser Fouad & T. H. Radwan. (2015). “Fatigue Life of Cruciform Welded Joint Strengthened with CFRP”. World Applied Sciences Journal 33 (5): 823-830. DOI: 10.5829/idosi.wasj.2015.33.05.14585. |
||||
46 |
Noorazliza Sulaiman, Junita Mohamad-Saleh and Abdul Ghani Abro, “New Enhanced Artificial Bee Colony (JA-ABC5) Algorithm with Application for Reactive Power Optimization”, The Scientific World Journal, Volume 2015 (2015), Article ID 396189 |
||||
|
CONFERENCES |
||||
No. |
Article Reference -Names, Title, Journal Name etc |
||||
47 |
H.F. Alharbi, Influence of Grain Orientation Spreads on Tensile Twinning Activation in Magnesium under Simple Compression and Plane Strain Compression: Crystal Plasticity Simulations, Materials Science and Technology 2017 (MS&T17), MS&T17, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania USA, 2017, p. 8. |
||||
48 |
K. Hergli, H. Marouani, M. Zidi, ‘Hysteresis identification models: A review’, 7h International Congress on Design and Modelling of Mechanical Systems, Hammamet, Tunisia, march 27h – 29h, 2017 (978-3-319-66696-9) (ISI conference). |
||||
249 |
K. Hergli, H. Marouani, M. Zidi, ‘Numerical determination of Jiles-Atherton hysteresis parameters: Magnetic behaviour under elastic deformation’, 11th International Symposium on Hysteresis Modelling and Micromagnetics, Barcelona, Spain, may 29th – 31st, 2017. |
||||
50 |
Bakr Rabeeh; Yasser Fouad ; Zeyad Abd El Azim Ultra-Fast Boronizing of Low Carbon Steel Compared With Chromium Carbide Hard Facing Steel Grades: ; German University in Cairo, GUC. TMS 2017, February 26 – March 2, 2017 • San Diego, California, USA |
||||
51 |
Sohail M. A. Khan, Mahir Es-Saheb,” Effect of Patch Thickness on the Repair Performance of Bonded Composite Repair in Cracked Aluminum Plate “, International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016), "Elsevier Materials Today Proceedings", MLR Institute of Technology, India, 7-9 July 2016. |
||||
52 |
Mahir Es-Saheb, Sohail M. A. Khan, M. E. Ali Mohsin, “Fatigue and Fracture Behaviour of AA 7075-T6 Plates Repaired at Different Crack Lengths”; 9th Regional Conference on Chemical Engineering, RCChE 2016, 21-22 Nov 2016 held in conjunction with the Postgraduate International Symposium on Chemical and Energy Engineering (POISChE 2016) at UTM Kuala Lumpur, Malaysia |
||||
53 |
Sohail M. A. Khan, Mahir Es-Saheb, M. E. Ali Mohsin, “Fatigue Behaviour of Cracked Aerospace Grade Aluminium Repaired with Bonded Composite Patch: Experimental Study.”; 9th Regional Conference on Chemical Engineering, RCChE 2016, 21-22 Nov 2016 held in conjunction with the Postgraduate International Symposium on Chemical and Energy Engineering (POISChE 2016) at UTM Kuala Lumpur, Malaysia |
||||
54 |
Yasser Fouad and Bakr Mohamed Rabeeh. “ The Synthesis and Processing Self-Healing Structural Al/Mg Lamellar Composite Materials, The TMS Annual Meeting & Exhibition, Metal and Polymer Matrix Composites II, TMS 2016 145th ANNUAL MEETING & EXHIBITION February 14 – 18, 2016 • Nashville, Tennessee. |
||||
55 |
Yasser Fouad, Zeyad Abdel-Azim and Bakr Mohamed Rabeeh Mechanical Assessment of Hypo- and Hyper- Eutectic Chromium Carbide Hard Facing Steel Grades, 17th International Conference on Applied Mechanics& Mechanical Engineering, April 19-21, 2016, Military Technical College. |
||||
56 |
Yasser Fouad, Tamer H. Sayed and Nahla K. Hassan, “Fatigue Life Of Composite Cruciform Welded Joint Strengthened With CFRP” Second International Conference on Infrastructure Management, Assessment and Rehabilitation Techniques (ICIMART'16) March 8–10, 2016 in Sharjah, UAE. |
||||
57 |
B. M. Rabeeh, and Yasser Fouad, “Engineering of Lamellar Composite induce Self-Repairing Shape Memory Alloy Hybrid Composite Structure", Proceeding of the 17th International Conference on Applied Mechanics And Mechanical Engineering, AMME Conf. April 19-21, 2016, Cairo, Egypt. |
||||
58 |
B. M. Rabeeh, and Yasser Fouad, Saif Ihab, and M. M. Abdoelkhair “Failure Assessment and Fatigue Damage Analysis for Acoustic Induced Vibration in Piping", Proceeding of the 17th International Conference on Applied Mechanics And Mechanical Engineering, AMME Conf. April 19-21, 2016, Cairo, Egypt. |
||||
59 |
B. M. Rabeeh, and Yasser Fouad, M. A. Yousef, A. M. El-Sarrag “Modeling and Simulation of Acoustically Induced Vibration in Piping; A New Nontraditional Trend", Proceeding of the 17th International Conference on Applied Mechanics And Mechanical Engineering, AMME Conf. April 19-21, 2016, Cairo, Egypt. |
||||
60 |
A. H. Alqahtani, A. I. Sulyman and A. Al-Sanie, “Loss-tolerant large-scale MUMIMO system with rateless space time block code,” IEEE, 22nd Asia-Pacific Conference on Communications (APCC), Yogyakarta, Indonesia, August 2016, pp. 342-347. |
||||
61 |
Ali H. Alqahtani, A. I. Sulyman and A. Al-Sanie, “Rateless space time block code for antenna failure in massive MU-MIMO systems,” IEEE Wireless Communications and Networking Conference (WCNC), Doha, Qatar, April 2016, pp. 1-6. |
||||
62 |
O. Phillips Agboola (2015). The Potentials of Concentrating Solar Thermal Power (CSTP) in Meeting Saudi Future Energy Gap. Proceedings of the World Congress on Engineering 2015 Vol II WCE 2015, July 1 - 3, 2015, Imperial College, London, U.K |
||||
63 |
Tamer H. Sayed, Yasser Fouad and Nahla K. Hassan, “fatigue behavior of welded joint retrofitted with CFRP under cyclic tensile loading”, 14th international conference on structure and geotechnical Engineering, ICSGE 14 Ain Shams University, 20-22 December 2015. |
||||
64 |
PO Agboola, Majid Hashemipour (2015). Assessing and Monitoring Student Participation in Engineering Laboratory using Radio Frequency Identification (RFID)–Satisfying ABET EC2000 Outcome 3b. World Congress on Engineering 2015 Vol II WCE 2015, July 1 - 3, 2015, Imperial College, London, U.K |
||||
65 |
Ziyad Almatroudi, Amr Mohamd Ragheb, , Abdelouahab Bentrcia, Habib Ali Fathallah, , “Spectral Phase Coding based LR-PON”, accepted in 11th International Conference on Innovations in Information Technology (IIT'15), Special Theme - Smart Living Cities, Big Data, Sustainable Development, , Dubai, UAE. November 01-03, 2015. |
||||
66 |
Ziyad Almatroudi, Amr Mohamd Ragheb, Habib Ali Fathallah, Abdelouahab Bentrcia, “Performance Investigation of CMA and RLS based Equalization for Next generation Long Reach Passive Optical Networks”, accepted in ICTRC2015, Abu Dhabi, UAE, 17 – 19, May 2015. |
||||
67 |
Hafizul A. Ismail, Michael S. Packianather, Roger I. Grosvenor, Eldaw E. Eldhukri, (2015). The Application of IWO in LQR Controller Design for the Robogymnast. SAI Intelligent Systems Conference 2015, November 10-11, 2015, London, UK |
||||
|
BOOKS |
||||
68 |
Es-Saheb, M. H., and Almajed, M.I., the Arabic translation of the book titled, “Principles of Nanotechnology”, by G. Ali Mansoori, World Scientific Publ. Co. Pte. Ltd.; NJ, (2005), USA, in press 2018. |
||||
69 |
F M Al-Oqla, O Y Alothman, M Jawaid, S M Sapuan, M H Es-Saheb, “Biomass and Bioenergy-Processing and Properties”, Ist edited by Hakeem, Khalid Rehman, Jawaid, Mohammad, Rashid, Umer, 08/2014: Chapter 1: Processing and Properties of Date Palm Fibers and Its Composites, pages 1-25; Springer-Verlag., ISBN: 978-3-319-07577-8. |